Preparing Tracer ® Tu On The Service Computer - Trane RTHD Installation Instructions Manual

Figure 18. KestrelView screenshot - accessing Chiller Service report
Figure 19. Chiller service report (example)
Preparing Tracer
Service Computer
After this retrofit, the UC800 controller will communicate with
the TR200 drive via a dedicated Modbus
(independent of the IPC bus). A software upgrade is required
to support this. The following steps detail how to obtain and
install the necessary software onto the service laptop
computer.
®
1. Tracer TU service tool version 9.0.322 or newer is
required to re-program the chiller's UC800. As of this
printing, this version of Tracer TU is available for download
SO-SVN048A-EN
®
TU on the
®
client connection
at: Trane Commercial Downloads - DL-TU - TU-Software
(sharepoint.com).
2. If it is not already present, install this version of Tracer TU
on the service computer.
3. After the correct version of Tracer TU is installed on the
service computer, return to the same page (see link
provided in Step 1, p. 25), and click the UC800 Firmware
link.
In the screen that appears, click the Latest
Version : Download link to download an EXE file. Run the
application to select specific chiller products and install the
correct software versions for that product.
Pre-Installation
25