BenQ TK951ST+ User Manual page 39

HDMI Settings
Dynamic
Dimming
4K Upscaling
Reset Display
• HDMI Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• Limited: Utilizes the Limited range RGB 16-235.
• Full: Utilizes the Full range RGB 0-255.
• HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance data
transmission.
• HDMI EDID
Switches between Enhanced for HDMI 2.0 EDID and Standard for HDMI 1.4
EDID. Selecting Standard which supports up to 1080p 60Hz may solve abnormal
display issues with some old players.
• Electronics Control
When you enable this function and connect an HDMI CEC-compatible device to
your projector with an HDMI cable, turning on the HDMI CEC compatible device
automatically turns on the projector, while turning off the projector automatically
turns off the HDMI CEC compatible device.
• Audio Return (HDMI-2)
When connecting to ARC compatible speaker to the projector with HDMI
cables, the audio can be returned to these speakers from the projector HDMI 2
port.
HDMI-1 audio can via ARC function (HDMI-2) to output audio to external
speakers.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Power On Link >
From Device
Power Off Link>
From Projector
Allows the projector to automatically detect the video content and enhance
contrast during dark scenes.
Allows the projector to automatically upscale all input timings to 4K resolution.
Returns all the settings on the Display main menu to the factory default values.
When the connected device is turned on, the projector
will be activated, too.
When the projector is turned off, the connected device
will be shut down, too.
Menu operation 39