Table of Contents
Advertisement
3. When done, press BACK to save your changes and exit.
This function is not available when the Warping is enabled.
Adjusting Corner Fit
You can manually adjust four corners of the image by setting the horizontal and vertical values.
1. To display the corner fit correction page, go to Advanced menu - Installation > Corner Fit and
press OK.
2. Press
/ / /
3. Press
/
to adjust vertical values.
4. Press
/
to adjust horizontal values.
to select one corner and press OK.
Exit
Corner Fit
Press to reset corner value
Positioning your projector
17
Advertisement
Table of Contents
