BenQ TK951ST+ User Manual page 23

If you forget the password
If you enter the wrong password, the password error message
will appear, and the Input Password message follows. If you
absolutely do not remember the password, you can use the
password recall procedure. See
procedure on page 23.
If you enter an incorrect password 5 times in succession, the
projector will automatically shut down in a short time.
Entering the password recall procedure
1. Press and hold OK for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode
the number. You may be required to provide proof of
purchase documentation to verify that you are an
authorized user of the projector.
Changing the password
1. Go to Advanced menu - System > Security Settings > Password. Press OK. The Password
page appears.
2. Highlight Change Password and press OK.
3. Enter the old password.
• If the password is correct, another message Input New Password appears.
• If the password is incorrect, the password error message will appear, and the message Input
Current Password appears for your retry. You can press BACK to cancel the change or try
another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
To disable password protection, go to Advanced menu - System > Security Settings > Password
> Power On Lock and press OK and
Enter the current password.
• If the password is correct, the OSD menu returns to the Security Settings page. You will not
have to enter the password next time turning on the projector.
• If the password is incorrect, the password error message will appear, and the message Input
Current Password appears for your retry. You can press BACK to cancel the change or try
another password.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.
Entering the password recall
/ to select Off. The message Input Password appears.
Password Error
Please try again.
Recall Password
Please write down the recall code, and
contact BenQ Customer Center.
Recall Code:
CJ-2014-541638
Return
Operation 23