BenQ TK951ST+ User Manual page 31

User
Management
Brightness
Contrast
Sharpness
There is one user-definable mode if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User)
as a starting point and customize the settings.
• Load Settings From
1. Go to Picture > Picture Mode.
2. Press / to select User 1 or User 2.
3. Press to highlight User Management, and press OK. The User
Management page is displayed.
4. Select Load Settings From and press OK.
5. Press / to select a picture mode that is closest to your need.
6. Press OK and BACK to return to the Picture menu.
7. Press to select the sub-menu items you want to change and adjust the
values with / . The adjustments define the selected user mode.
• Rename User Mode
Select to rename the customized picture mode (User 1/User 2). The new name
can be up to 9 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
1. Go to Picture > Picture Mode.
2. Press / to select User 1or User 2.
3. Press to highlight User Management, and press OK. The User
Management page is displayed.
4. Press to highlight Rename User Mode and press OK. The Rename
User Mode page is displayed.
5. Use / / / , and OK to set desired characters.
6. When done, press BACK to save the changes and exit.
The higher the value, the brighter the image. Adjust this control so the black
areas of the image appear just as black and that detail in the dark areas is visible.
The higher the value, the greater the contrast. Use this to set the peak white level
after you have previously adjusted the Brightness setting to suit your selected
input and viewing environment.
The higher the value, the sharper the picture becomes.
Menu operation 31