System] Menu - Furuno SATELLITE COMPASS SC-33 Operator's Manual

3. ADJUSTMENTS
3.4

[System] Menu

You can check the system information, perform the diagnostic test and restore the factory default
from the [System] menu.
Menu item
System Information
Main PCB
Sub IMU PCB
MAIN CPU OS Version
MAIN CPU Application Version
WMM
GNSS1
GNSS2
GNSS3
CAN Unique Number
Main Overall Powered Time
Sub IMU Runtime
Antenna1 Powered Time
Antenna2 Powered Time
Model
Simple Diagnostic Test
Simple Diagnostic
ROM
Internal RAM
GNSS1 ROM
GNSS1 RAM
GNSS2 ROM
GNSS2 RAM
GNSS3 ROM
GNSS3 RAM
CAN
Main Accelerometer Status X
Main Accelerometer Status Y
Main Accelerometer Status Z
Main Rate Gyro Status X
Main Rate Gyro Status Y
Main Rate Gyro Status Z
Main Magnetic Sensor Status
Main Pressure Sensor Status
Sub IMU Accelerometer Status X
Sub IMU Accelerometer Status Y
Sub IMU Accelerometer Status Z
Version of the Main board.
Version of the SUB IMU board. When the SUB IMU board is not
installed, "- -" appears.
OS version.
SC-33 software version.
Software version of the WMM (World Magnetic Model).
Version of the GNSS core 1 to 3.
CAN unique ID of the SC-33.
Total operation time of the Main board.
Total operation time of the SUB IMU board. When the SUB IMU
board is not installed, "- -" appears.
Total operating time of the antenna 1 and 2.
Product model name (SC-33).
Select [START] to perform the diagnostic test.
ROM test result (OK or NG).
Internal RAM test result (OK or NG)
ROM and RAM check results for GNSS1 to 3 (OK or NG).
CAN check result (OK or NG).
Test result for the acceleration sensor on the MAIN board (OK or
NG). X-axis, Y-axis and Z-axis test results are shown. When the
SUB IMU board is installed, check result indicates ""- -".
Test result for the gyro sensor on the MAIN board (OK or NG). X-
axis, Y-axis and Z-axis test results are shown. When the SUB
IMU board is installed, check result indicates ""- -".
Test result for the magnetic sensor on the MAIN board (OK or
NG). When the SUB IMU board is installed, check result indicates
""- -".
Test result for the air pressure sensor on the MAIN board (OK or
NG). When the SUB IMU board is installed, check result indicates
""- -".
Test result for the acceleration sensor on the SUB IMU board
(OK or NG). X-axis, Y-axis and Z-axis test results are shown.
When the SUB IMU board is not installed, check result indicates
""- -".
20
Description