Table of Contents
Advertisement
3.7
How to Set Up a Secondary Monitor
When a secondary monitor is connected, use the following procedure to adjust the
display settings.
1. Press the MENU/ESC key to open the menu, then left click [Others] [Initial Set-
tings] [Changeable] [Monitor Settings].
2. Left click [2nd Monitor Setting].
3. Select [Dual Display] or [Sub Display] as appropri-
ate, then left click.
• [Dual Display]: When in Dual mode, each dis-
play can be assigned as Main or Sub monitor.
• [Sub Display]: Displays the same screen as the
Main or Sub monitor
When there is no secondary monitor connected,
set this option to [OFF].
4. Left click [Quit].
5. Turn off and on the power, then resolution setting is reflected.
3.8
System Menu
3.8.1
How to access the system menu
The system menu is used by FURUNO technicians to set up and maintain the unit.
This menu should not be accessed otherwise. Use the following procedure to access
the system menu items. (System menu items appear to the right of the regular
menus.)
1. Turn the power to the unit on, then, with no menus displayed on screen, proceed
to next step.
2. While pressing and holding down the MENU/ESC key, press 1/F1, 3/F3, 5/F5 key
in order.
3. Release the MENU/ESC key, then press the MENU/ESC key twice.
4. Left click [Others].
The system menu items are displayed to the right side of the normal [Others]
menu.
Erase Marks...
Wheel Setting...
Mid Key Setting
Display Setting...
Alarm & Audio...
Register...
Record/Recall...
Initial Setting...
Repeating the above procedure will hide the system menu items.
Others
Interface Setting...
EXT Data Setting...
: Fixed Position
Own Ship Mark...
Test&Initialization...
Others...
Dummy...
3. ADJUSTMENT AND CHECKS
Monitor Setting
2nd Monitor Setting
Monitor Resolution
Quit
System menu is displayed as
part of the [Others] menu.
Quit
: OFF
: SXGA
Quit
Cancel
OFF
Dual Display
Sub Display
3-11
Advertisement
Table of Contents
