Philips MiniVac FC6149/02 User Manual page 11

Remove the filter unit from the dust compartment (Fig. 16).
2
Empty the dust compartment by shaking it with your free
3
hand (Fig. 17).
If necessary, clean the dust compartment with a damp cloth.
4
If necessary, clean the filter unit. See section 'Cleaning the filter
5
unit'.
To reattach the dust compartment, align the slot on the dust
6
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1). Then push the top of the dust
compartment towards the appliance (2) until it locks into place
('click') (Fig. 18).
Cleaning the filter unit
Make sure you clean the filter unit regularly.
Turn the outer filter anticlockwise (1) and remove it from the filter
1
holder (2) (Fig. 19).
Leave the inner filter attached to the filter holder.
Clean the inner filter and the outer filter with a brush or with a
2
normal vacuum cleaner if they are very dirty.
Note: If necessary , you can clean the inner filter and the outer filter in cold
or lukewarm water. Dry the inner and outer filter thoroughly before you use
the filter unit again.
Place the outer filter back onto the filter holder (1) and turn it
3
clockwise to attach it (2). (Fig. 20)
Put the filter unit back into the dust compartment (Fig. 21).
4
Note: Make sure you insert the filter unit in the correct way.
English
11