Graco Lube Pro 24Z020 Instructions Manual page 22

Repair
Outlet Tube O-ring (13) and Pump Cylinder
O-ring (9)
16. Apply a thin layer of grease to the outlet tube o-ring
(13) and the pump cylinder o-ring (9) and install the
o-rings on the outlet tube (14) and the pump cylin-
der (12) (F . 38).
IG
13
9
F . 38
IG
17. Install the pump cylinder (12) in air motor cylinder
(3). Use a wrench to tighten nut (3a) securely.
Torque to 28 to 32 ft. lbs. (37.9 to 43.4
22
18. Install the outlet tube (14) on the pump cylinder (12).
14
19
12
3
F
N.m).
Securely hold the nut (3a) [located on the bottom of
the pump cylinder (12)] in place with a wrench.
Secure a second wrench on the flats of the outlet
tube (14). Turn the outlet tube clockwise to tighten
it to the pump cylinder (12) (F
32 ft. lbs. (37.9 to 43.4
flats
14
12
. 39
IG
. 39). Torque to 28 to
IG
N.m).
3a
3A4033J