Removing & Installing Body Components
Seat
Stays
66
Seat
u
#
Removal
1.
2.
Prongs
#
Installation
1.
Seat lock
2.
Ignition key
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.
Insert the ignition key into the seat lock.
Turn it clockwise, then pull the seat up
and back.
Insert the prongs into the stays on the
frame.
Push forward and down on the rear of the
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.