Removing & Installing Body Components; Battery - Honda CBF125ME 2023 Owner's Manual

Removing & Installing Body Components

Battery

Terminal
nut
Negative
terminal
Bolt
Battery holder
#
Removal
Make sure the ignition switch is in the
(Off) position.
Remove the right side cover.
1.
Remove the bolt.
2.
Remove the battery holder.
3.
Disconnect the negative - terminal from
4.
Positive
the battery.
terminal
Disconnect the positive + terminal from
5.
Battery
the battery.
Remove the battery, taking care not to
6.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure bolts and nuts are
Terminal
tight.
nut
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 67
2
P. 31
2
P. 55
2
P. 89
2
65