Table of Contents
Advertisement
4
Pull up the handle until it is fully
extended.
7a
1
2
For bagging operation, install the grass catcher. Raise the rear door, and hook
the grass catcher to the mower. Ensure that the catcher is secured, then lower
the rear door.
NOTE: The grass catcher collects grass clippings preventing them from being
discharged across the lawn while mowing.
9
2
1
Insert the safety key, and close the
battery door.
NOTE: Make sure that the handle is
fully extended so that the handle locks
can properly secure the handle.
3
10
2
1
1
+
/
A
B
Squeeze and hold either side of the on/
off trigger, then press the start button to
turn on the product.
5
Close the handle locks to secure the
handle.
7b
1
For mulching operation, install the
mulching plug. Raise the rear door,
and insert the mulching plug into the
rear discharge opening. Ensure that the
mulching plug is secured, then lower
the rear door.
A
B
NOTE: The on/off trigger must be
continuously held during use. To turn
the product off, release the on/off
trigger.
Getting started
6
2
9
Advertisement
Table of Contents
