Ryobi R18LMWP4 Manual page 8

1
Wear full eye protection, ear protection,
non-slip heavy-duty gloves, substantial
footwear, and long trousers at all times
while operating the product. Do not
operate the product when barefoot or
wearing open sandals.
6
2
1
4
5
Adjust the operating angle of the handle to your preference. Pull the quick-release
fastener, and turn it 90°. Align the handle to the preferred locking slot. Turn the
fastener knob 90°, and insert the fastener bolt into the slot.
NOTE: The mulching plug covers the
rear discharge opening to allow the
blade to cut and recut for finer clippings.
8
Getting started
2
Set the handle in the correct operating
position. Ensure that the locking pin in
the lower handle clicks into place.
3
8
1
2
Open the battery door. Insert the battery
pack into the active battery port. Make
sure that the latch on the battery pack
clicks in place, and that the battery pack
is secured before operating the product.
3
Open the handle lock.
NOTE: Insert the grass catcher frame
into the bag.
NOTE: Only one battery port is active
during operation of the product. Use the
other battery port to store an additional
battery pack as backup.