Toshiba RAV-GM901KRTP Series Service Manual page 89

No. Part name
5
Fan motor 1) Follow the procedure item 3 and 4 .
2) Loosen the set screw of the cross flow fan.
3) Remove 2 fixing screws of the motor band.
4) Pull the motor band and the fan motor
<To re-installation>
- Check the type name of fan motor.
- Keep connector position and arrange fan
6 Horizontal louver 1) Remove shaft of the horizontal louver
Procedures
Cross flow fan
3.5 mm
Set screw
outward.
motor wires follow figure.
Fan motor wire
from the back body. (First remove 2 the
center shafts then remove the other shafts.)
Body back
Fan motor
Screws
Fan motor
connector
- 89 -
Remarks
Cross flow fan
Vertical louver
Hexagon screw driver
Motor band
Fan motor
Drain pan
Horizontal louver