Troubleshooting - Sony Ericsson HBH-35 Declaration Of Conformity

Headset battery status
The headset comes with a built-in battery.
To check the battery status
1. Make sure the headset is turned on. Then press and
release both and
2. The battery status is indicated by one of these three levels:
• High – three green flashes
• Medium – two green flashes
• Low – one green flash
12

Troubleshooting

This is the Internet version of the user's guide. © Print only for private use.
.
Troubleshooting
This section lists some problems that you might
encounter while using your headset.
No sound contact between headset and phone
The headset and the phone you are using with it have
to be paired to recognize each other.
They also have to be within range of each other.
The outdoor range is up to 10 m (30 ft), but solid
objects or the surroundings can affect the range. For
best performance, it is recommended to keep the phone
and headset in the same room and no more than 5 m
(15 ft) from each other.
The headset indicator light flashes red
This indicates that the headset has only limited talk
and standby time left. Charge the headset battery for
approximately 1 to 1.5 hours.
No indication of charging is shown
If you charge a headset battery that is empty, or has
not been used for a long time, it may take up to 30
minutes before a light to indicate charging (a steady
red light) appears.