Table of Contents
Advertisement
SAFETY INSTRUCTIONS
WARNING
CAUTION
(Examples of symbols)
Warning, Caution
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits.
Only qualified personnel should
work inside the equipment.
Turn off the power at the
switchboard before beginning
the installation.
Fire or electrical shock can result
if the power is left on.
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
If your vessel is configured with
an autopilot system, install an
autopilot control unit (or emer-
gency autopilot stop button) at
each helm station, to allow you
to disable the autopilot in an
emergency.
If the autopilot cannot be disabled,
accidents may result.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Prohibitive Action
Mandatory Action
CAUTION
Ground the equipment to prevent
electrical shock and mutual interference.
Use the proper fuse.
Use of an incorrect fuse may
damage the equipment.
The front panel is made of glass.
Handle it with care.
Injury can result if the glass breaks.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
Model
compass
TZT19F
0.65 m
Steering
compass
0.40 m
i
Advertisement
Table of Contents
