Furuno NAVnet 3D MFDBB Installation Manual page 28

Multi function display

Hide thumbs Also See for NAVnet 3D MFDBB:

Table of Contents

Global tab-Nickname dialog box

All equipments in the NavNet 3D system are assigned respective nicknames. If you don't like the

preassigned nickname, you can change it here. Use the cursor pad to select location. Rotate the

rotary knob to select character and push it to confirm selection. Repeat this operation to complete

the nicknames.

27.Click the Next button.

Global tab-Camera Name dialog box

The cameras connected to the network are assigned a name. If you don't like the preassigned

name, you can change it here. Change the name using the cursor pad and rotary knob as is the

Global tab-Nickname dialog box (PinP1 to4: analog cameras, IPcamera1 to 4: IP cameras).

28.Click the Next button.

Table of Contents