Toro 72980 Operator's Manual page 41

Figure 44
1. Dipstick
5. Fully install the dipstick and ensure that it latches
(Figure 45).
Figure 45
6. Remove the dipstick and check the oil level.
The oil should be at the full-level indicator on
the dipstick (Figure
Note:
Do not twist the dipstick.
2. Full line
44).
7. If the oil level is low, open the oil-fill cap
46).
1. Oil-fill cap
g389246
8. Slowly add the specified engine oil into the tank.
Important:
9. After adding oil, check the oil level.
10. Fully install the dipstick and ensure that it latches
(Figure 45).
11. Close the oil-fill cap.
g390919
41
Figure 46
Do not overfill.
(Figure
g389245