Table of Contents
Advertisement
Electronic-Control Unit
Malfunction-Indicator Light
For Models with an EFI Engine Only
The electronic-control unit (ECU) continuously
monitors the operation of the EFI system.
If a problem or fault within the system is detected, the
malfunction-indicator light (MIL) illuminates.
The MIL is the red light located in the right console
panel.
Once the MIL illuminates, make initial troubleshooting
checks; refer to the MIL section under
Troubleshooting
(page
70).
If these checks do not correct the problem, further
diagnosis and servicing by an Authorized Service
Dealer is necessary.
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
(Figure
4).
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N
-
position when exiting
EUTRAL
LOCK
the machine
(Figure
4). Always position the
motion-control levers into the N
-
position
EUTRAL
LOCK
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to
Using the Fuel-Shutoff
Valve (page
32).
15
Advertisement
Table of Contents
