Advertisement
2. First Use
2. First Use
2.1 Inserting the Memory Card
Insert the included SD memory card to record and store your videos and photos.
When the battery is low, media stored on the memory card will not be erased.
Please insert the SD memory card by following the steps below:
1. Open the screen and open the memory card door on the bottom by pushing
in the direction of the arrow.
2. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card in until you hear an audible click.
The memory card can only be inserted in one way. Do not force the card
in if it will not go in smoothly.
3. Close the memory card door by pushing it down and sliding it back into place.
4. To remove the memory card, simply push in and the card will eject back out.
NOTE:
Please format the memory card before using the camcorder
(Caution, this will erase all data on the card).
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
Memory card rating must be Class 10 or above.
1. Open the SD card door
2. Insert the memory card as shown
6
Advertisement
