Ipm On Transistor Pcb - Fujitsu AOUG12LZAH1 Service Manual

5-6. IPM on transistor PCB

Check point 1
1 Disconnect the connection wires between the transistor PCB—capacitor
PCB and transistor PCB—inverter PCB.
2 Set the tester to the resistance mode, and measure the resistance between the following termi-
nals.
TM301 (P)—TM305 (U)/TM304 (V)/TM303 (W)
TM302 (N)—TM305 (U)/TM304 (V)/TM303 (W)
3 Judge the result of 2 as follows:
Terminal
Tester
(+) (-)
P U
P V
P W
U P
V P
W P
N U
N V
N W
U N
V N
W N
5-6. IPM on transistor PCB
Resistance value
Over 2 kΩ (Including ∞ Ω)
Over 20 kΩ (Including ∞ Ω)
Over 2 kΩ (Including ∞ Ω)
- (03-75) -
5. Service parts information