Table of Contents
Advertisement
Top cover
NOTE:
Top cover spare part kits include the touchpad assembly.
Description
Top cover (includes touchpad)
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service door (see
b.
Hard drive
c.
Keyboard (see
Remove the top cover:
1.
Position the computer upside-down with the front toward you.
2.
Remove the 10 Torx T8 2.5×7.0 screws (1) that secure the top cover to the computer.
3.
Remove the 2 Phillips PM2.0×1.8 screws (2) that secure the top cover to the computer.
4.
Position the computer upright and open it as far as possible.
50
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service doors on page
(Hard drive on page
34)
Keyboard on page
43)
(Battery Safe mode on page
32).
Spare part number
905702-001
31).
Advertisement
Table of Contents
