NETGEAR WAX615-100NAS User Manual page 251

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
Table 3. Factory default settings (Continued)
Feature
DHCP client
NTP client
Spanning Tree Protocol
Network integrity check
IGMP snooping
802.1Q VLAN
Management VLAN
Syslog
Ethernet LLDP
UPnP
Multicast DNS gateway
LEDs
Energy Efficiency Mode
WLAN settings for an individual WiFi network (SSID or VAP)
Broadcast SSID
VLAN ID (for WiFi clients)
Network authentication
802.11w (PMF)
Multi PSK
Broadcast schedule
Radio bands
Band steering
WiFi client isolation
URL tracking
DHCP offer broadcast to
unicast
Factory Default Settings and
Technical Specifications
Default Setting
Enabled so that the access point receives an IP address from a DHCP server or router
in the network.
Enabled
Disabled
Disabled
Disabled
Untagged VLAN with VLAN ID 1
VLAN ID 1
Disabled
Enabled
Enabled
Disabled
All enabled
Disabled
Enabled
1
WPA2 Personal (which is WPA2-PSK)
The nonconfigurable data encryption for WPA2 Personal is AES
Disabled
Disabled
Always on
All enabled
Disabled
Automatic band steering includes automatic 802.11k RRM and automatic 802.11v
WiFi network management.
Disabled
Disabled
Enabled
251 User Manual