NETGEAR WAX615-100NAS User Manual page 212

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
6. Scroll down and click the Advanced Rate Selection tab.
Note: For the selected SSID, you can specify the radio settings for the 2.4 GHz and
5 GHz radio bands individually. The descriptions in the following steps apply to both
radios.
7. To apply basic fixed multicast rates, from the Fixed Multicast Rate menu, select
one of the following rates, depending on the radio band:
• 2.4 GHz: 1, 2, 5.5, or 11 Mbps or Auto. (By default, Auto is 11 Mbps.)
• 5 GHz: 6, 12, or 24 Mbps or Auto. (By default, Auto is 24 Mbps.)
8. To enable automatic minimum rate control for beacon and other management frames
and for control and data frames, select the Rate Control check box.
If you select the Rate Control check box, the Density Level slider becomes available.
9. To set the density level for your environment, move the Density Level slider to 0,
1, 2, 3, or 4.
As you move the slider, the selected density level is mapped to a corresponding
WiFi mode, beacon rate, minimum legacy rate, and minimum MCS rate. The available
settings depend on the WiFi mode that you select for the radio (see Change the
WiFi mode for a radio on page 89). By default, the WiFi mode for each radio is 11ax.
Manage the Advanced WiFi
Features for a WiFi network
212 User Manual