NETGEAR WAX615-100NAS User Manual page 234

Insight managed wifi 6 ax3000
Table of Contents

Advertisement

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Diagnostics > Packet Capture.
5. Specify the settings that are described in the following table.
Setting
Capture Interface
Max. Capture File Size
(64-4096 KB)
Diagnostics and
Troubleshooting
Description
From the Capture Interface menu, select one of the following interfaces on which
packets must be captured:
• br-lan. All packets are captured, that is, packets on the Ethernet interface, 2.4 GHz
radio, and 5 GHz radio. This is the default setting.
• Eth0. Only packets on the Ethernet interface are captured.
• radio1. Only packets on the 2.4 GHz radio are captured.
• radio2. Only packets on the 5 GHz radio are captured.
Enter the maximum size that the file with captured packets is limited to. The range
is from 64 to 4096 KB. The default is 1024 KB.
234
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wax615

Table of Contents