Switch-Off Button; Start Button; Combination Switch - Husqvarna FC 450 2020 Owner's Manual

6.4

Switch-off button

6.5

Start button

6.6

Combination switch

Switch-off button
Possible states
• The switch-off button
position, the ignition circuit is closed and the engine can be
started.
• The switch-off button
ignition circuit is interrupted, a running engine stops, and
a non-running engine will not start.
V01543-10
1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button
• The start button
motor is actuated.
S01195-10
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated
1
when LED 1 lights up.
STANDARD with TC – STANDARD mapping with
1 TC
traction control is activated when LED 1 and TC light
up.
ADVANCED – ADVANCED mapping is activated,
2
when LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when LED 2 and TC light
up.
The engine characteristic can be changed using button MAP on
the combination switch.
The launch control and the traction control can also be activated
using the combination switch.
H02887-01
1
is fitted on the left side of the handlebar.
is in the basic position – In this
is pressed – In this position, the
is in the basic position
is pressed – In this position, the starter
CONTROLS 6
17