11.13
Checking steering head bearing play
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and
damages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized Husqvarna Motorcycles
workshop will be glad to help.)
SERVICE WORK ON THE CHASSIS 11
–
Mount and tighten screw
Guideline
Screw, top
steering stem
A00510-11
–
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder
left.
A00509-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
bl
screws
S02315-12
Finishing work
–
Install front fender. (
–
Mount the handlebar cushion.
–
Install the start number plate. (
–
Install the front wheel.
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
7
.
M8
20 Nm (14.8 lbf ft)
8
.
M8
17 Nm (12.5 lbf ft)
M8
25 Nm (18.4 lbf ft)
.
p. 65)
p. 64)
(
p. 108)
p. 61)
®
Loctite
243™
9
on the
bk
.
®
Loctite
243™
p. 52)
61