Changing The Coolant - Husqvarna FC 450 2020 Owner's Manual

15.6

Changing the coolant

Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or
the cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator
hoses or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Main work
–
Make sure that screw
–
Position the motorcycle upright.
–
Pour coolant in up to measurement
fins.
Guideline
A
Distance
ator fins
V01327-10
Coolant
–
Mount the radiator cap.
–
Go for a short test ride.
–
Check the coolant level. (
Finishing work
(ROCKSTAR EDITION)
–
Install the engine guard. (
Condition
The engine is cold.
Preparatory work
(ROCKSTAR EDITION)
–
Remove the engine guard. (
COOLING SYSTEM 15
1
is tightened.
A
above the radiator
10 mm (0.39 in)
above the radi-
1.20 l Coolant (
(1.27 qt.)
p. 121)
p. 55)
p. 54)
p. 155)
123