Table of Contents
Advertisement
13.5
Checking the tire condition
Info
Only mount tires approved and/or recommended by Husqvarna Motorcycles.
Other tires could have a negative effect on handling characteristics.
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of
the motorcycle.
The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
–
Position chain adjuster
it yet.
–
Make sure that chain adjusters
adjusting screws
–
Check the chain tension. (
–
4
Tighten nut
Guideline
Nut, rear wheel spin-
dle
Info
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary ratios
with the same chain length.
Chain adjusters
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
F00395-11
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the front and rear tires for cuts, run-in objects, and
other damage.
»
If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
400602-10
–
Check the tire age.
H01144-01
WHEELS, TIRES 13
3
4
. Mount nut
, but do not tighten
3
are fitted correctly on
5
.
p. 67)
.
M25x1.5
80 Nm (59 lbf ft)
3
can be turned by 180°.
p. 44)
91
Advertisement
Table of Contents
