Changing The Mapping; Adjusting The Idle Speed - Husqvarna FS 450 2020 Owner's Manual

16 TUNING THE ENGINE
16.4
16.5
106

Changing the mapping

Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
H02889-01
H02886-01

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Activating STANDARD mapping:
–
Press button MAP until LED 1 lights up.
Guideline
Engine speed
STANDARD – balanced response
Activating ADVANCED mapping:
–
Press button MAP until LED 2 lights up.
Guideline
Engine speed
ADVANCED – direct response
< 4,000 rpm
< 4,000 rpm