Checking The Remaining Time Or The Recording Position; On The Recorder - Sony MZ-R55 Operating Instructions Manual

3
While observing the level meter in
the display, adjust the recording level
by pressing + (+) or = (–).
Set the level so that it hits the –12dB
at maximum input level.
.
Volume decreases
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
4
Press P again to start recording.
To stop recording, press p.
The recording level control is switched back
to automatic control when you record the
next time.
z
When you record with microphone input,
select the sensitivity with MIC SENS (page
12).
14-
GB
increases
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.

On the recorder

DISPLAY REC indicator
1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
While recording
A
Track number
Track number
1)
Current date
1)
Appears only when the clock is set.
A
B
B
Elapsed time
Remaining time for
recording
1)
Current time