Table of Contents
Advertisement
PREPARATION > Automatic adjustment of speaker settings (YPAO)
6
Press the ENTER key to start YPAO making the automatic adjustments of speaker
settings.
Adjustments start automatically after about 10 seconds. It takes about one minute.
SPEAKERS
A
B
PHONO
SLEEP
LINE 1
LINE 2
CD
TV
COAX
USB DAC
OPT 1
OPT 2
BLUETOOTH
DISPLAY
TUNER
NET
MEMORY
PRESET
1
2
3
ENTER
ENTER
HOME
RETURN
SETUP
OPTION
VOLUME
NOW PLAYING
MUTE
REPEAT
SHUFFLE
NOTE
To cancel the operation before starting the YPAO function, unplug the YPAO microphone. After YPAO has started, press the
RETURN key.
7
Check the results on the front display.
After all adjustments are complete, the results are shown on the front display. Follow the
instructions and press the ENTER key to complete the adjustments.
8
Unplug the YPAO microphone from the YPAO MIC jack.
This completes the automatic adjustments of speaker settings via YPAO.
NOTICE
The YPAO microphone is sensitive to heat, so avoid hot places (such as on top of an external device) or places in direct sunlight
(
when storing it.
NOTE
Running YPAO automatically enables the YPAO Volume function, which is linked to the volume and automatically adjusts the bass/
(
treble balance. This allows you to enjoy a natural balance in sound quality, even at low volumes.
Run the YPAO process for each set of speakers that will be used. Speaker settings are saved individually for each of the speakers
(
used (A, B, A+B and Off).
Error messages may be displayed during auto-adjustment, and/or warning messages may appear in the results.
(
You can use the dedicated app "MusicCast Controller" to check the results of YPAO measurements and change the speaker
(
settings.
MEMORY
MEMORY
PRESET
PRESET
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
3
3
ENTER
ENTER
47
ENTER
Advertisement
Table of Contents
