Table of Contents
Advertisement
PREPARATION > Connecting speakers
2
Turn the knob of the speaker jack to the left to loosen it, then insert the core of the
speaker cable into the hole in the jack.
3
Turn the knob back to the right to tighten it.
NOTICE
When preparing the speaker cable, do so far away from the product. Pieces of the core wires of the speaker cable may fall inside
(
the product and cause a short circuit, resulting in malfunction.
Do not allow the core wires of a speaker cable to touch the core wires of another speaker cable or any metal parts of the
(
product. Doing so may damage the product and/or the speakers.
NOTE
Be sure to connect to the jacks correctly: left channel (L), right channel (R) and + (red), - (black). If connected incorrectly, no audio may
be output from the speakers. Also, if the polarity is wrong, the audio may sound strange.
n
Connecting via banana plug (Models for U.S.A., Canada, China and Taiwan)
When using a banana plug, tighten the knob of the speaker terminal and insert a banana plug into the end of
the terminal.
Banana plug
Related links
"Making bi-wiring connections" (p.32)
(
"Connecting a subwoofer" (p.33)
(
"Switching speaker impedance" (p.117)
(
31
Advertisement
Table of Contents
