Kohler K-29777-PA-0 Homeowner's Manual page 11

Automatic UV Cleaning
When enabled, an automatic UV cleaning cycle activates every 24 hours. Lifting the seat cover ends the process.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press and hold the "Clean" icon on the remote control until the nightlight blinks. Release the icon, then press to
change the setting.
A short beep and "Seat Temp" LEDs ON indicate that the feature is enabled. A long beep and "Seat Temp" LEDs OFF
indicate that the feature is disabled.
Press the "Stop" icon to exit setup mode.
Nightlight
When enabled, the nightlight automatically turns on in low lighting conditions.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press and hold the "Front" icon on the remote control until the three LEDs turn ON. Release the icon, then press to
change the setting.
A short beep and icon LEDs ON indicate that the feature is enabled. A long beep and icon LEDs OFF indicate that the
feature is disabled.
Press the "Stop" icon to exit setup mode.
Energy Save
When enabled, the toilet conserves energy by reducing the heated seat temperature when the toilet is not in use. When
disabled, the seat will remain at its set level even when not in use.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press and hold the "Seat Temp" icon on the remote control until the three LEDs turn ON. Release the icon, then press
to change the setting.
A short beep and icon LEDs ON indicate that the feature is enabled. A long beep and icon LEDs OFF indicate that the
feature is disabled.
Press the "Stop" icon to exit setup mode.
Prolonged Seating Indicator
When enabled, the toilet will beep several times if the user has been on the seat for a prolonged period of time.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press and hold the "Massage" icon on the remote control until the three LEDs turn ON. Release the icon, then press to
change the setting.
A short beep and icon LEDs ON indicate that the feature is enabled. A long beep and icon LEDs OFF indicate that the
feature is disabled.
Press the "Stop" icon to exit setup mode.
Kohler Co. 11
1486085-5-C