Honda ELECTRIC 2019 Owner's Manual page 520

uuJump Startingu
■
What to Do After the Power System Starts
Once your vehicle's power system has started, remove the jumper cables in the
following order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or an authorized Honda
Clarity Electric dealer.
518
1What to Do After the Power System Starts
The indicators for the Vehicle Stability Assist® (VSA®)
system, VSA® OFF, Collision Mitigation Braking
System TM (CMBS TM ), and low tire pressure/Tire
Pressure Monitoring System (TPMS) may come on
along with a message in the driver information
interface when you turn the power system on after
reconnecting the battery.
Drive a short distance at 12 mph (20 km/h). The
indicator should go off. If it does not, have your
vehicle checked by an authorized Honda Clarity
Electric dealer.