Honda ELECTRIC 2019 Owner's Manual page 453

uuCharginguControl Box
Control Box LED Status Indicator
Charge
Timer On Explanatory notes Goes off Stays on Blinking
Indicator
READY CHARGE FAULT
Inappropriately grounded circuit or configured wall outlet may
cause the plug to over-heat. The system can continue charging the
vehicle with the reduced supply of electricity, but for your safety,
unplug the cable and have the vehicle and the control box inspected
at an authorized Honda Clarity Electric dealer.
Plug over-heated and charge rate was reduced. Contact an
authorized Honda Clarity Electric dealer.
You don't have to charge before contacting the dealer.
Inappropriately grounded circuit or configured wall outlet may
cause the plug to over-heat. Do not charge the vehicle until you
have the vehicle and the control box inspected at an authorized
Fault
Honda Clarity Electric dealer.
Ground wire in the wall outlet is open. Consult an electrician.
Short circuit. Stop using immediately and see an authorized Honda
Clarity Electric dealer.
Comes on if there is a problem with the charging cable. Stop using
the cable immediately, and contact an authorized Honda Clarity
Electric dealer.
There could be a problem with the electric supply or an internal
failure. First try a known good outlet.
Continued 451