Honda ELECTRIC 2019 Owner's Manual page 450

uuCharginguCharge the High Voltage battery using a Level 1, 2 or SAE J1772 DC charger
■
How to Charge (DC)
Charge Lid
448
1. Stop your vehicle at a station specific for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver's door.
2. Put the transmission into
3. Turn off the power system.
4. Press and hold the charge lid release
button.
Lid Open
u The lid opens.
Button
u The illumination lamp inside the charge
lid comes on for a few minutes.
5. Open the charge lid.
6. Remove the inlet cap.
Inlet Cap
1How to Charge (DC)
The charge speed slows down towards the
completion of the battery charging.
The charge lid can open by remote transmitter.
Be sure to follow the instructions and safety
( P .
precautions provided with the SAE J1772 DC charger
equipment.
While the vehicle is charging or is parked after
running, the compressor may operate to melt any
frost that has formed on the climate control system.
Water from the melted frost drains out through the
front section of the vehicle, near the undercover.