Honda ELECTRIC 2019 Owner's Manual page 448

uuCharginguCharge the High Voltage battery using a Level 1, 2 or SAE J1772 DC charger
Release Button
■
How to Charge (Level 2)
446
■
When charging is completed
Press the release button on the charging
connector to disengage it from the inlet.
The charge indicator goes off once charging is
completed.
1. Stop your vehicle at a station specific for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver's door.
2. Put the transmission into
3. Turn off the power system.
4. Press and hold the charge lid release
button.
Lid Open
u The lid opens.
Button
u The illumination lamp inside the charge
lid comes on for a few minutes.
1Charging
If a blackout or other electrical interruption occurs
during vehicle charging, the vehicle will automatically
resume charging once power is restored.
To avoid damage to the charger, take these
precautions:
•
Do not hit the charging connector components
with a hard object or drop them on the ground.
•
Do not pull, twist, tangle, drag or step on the
charging cable.
•
Do not use or store near any sources of heat.
•
Do not expose to liquids or use harsh chemicals to
clean.
1How to Charge (Level 1)
The charge speed slows down towards the
P .
(
completion of the battery charging.
The High Voltage battery may not be charged even if
the charging connector is properly connected to the
vehicle's inlet when the charging timer is set but the
timer has not yet started.
If you unplug the charging connector from the inlet,
charging cancels automatically.