Programming The Cd Tracks; Program Play - Sony MHC-DP700 Operating Instructions Manual

To Do this
Play Press REPEAT during playback
repeatedly until "REPEAT" or "REPEAT
(Repeat Play) 1" appears.
REPEAT*: For all the tracks on
the CD up to 5 times.
REPEAT 1: For a single track
only.
To cancel Repeat Play, press
REPEAT until "REPEAT" and
"REPEAT 1" disappears.
* You cannot use this function during ALL DISCS
SHUFFLE.
Tips
• You can use the digipad for CD operations.
• Pressing CD while the power is off automatically
turns the power on.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1
Press CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press DISC 1–3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears in the
display.
4
Press . or > repeatedly until the
track you want appears in the display.
Disc tray
Track
number
number
PROGRAM
MUSIC
1 2 3
GAME
Total playing time
(including selected
track)
MOVIE
A B
TOOL
5
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press nN.
Press
To
Cancel Program Play PLAY MODE repeatedly until
"1 DISC" or "ALL DISCS"
appears in the display.
Clear a track from CLEAR on the remote when
playback is stopped.
the end
1 Press DISC 1–3 to select a
Add a track to the
CD.
program when
2 Press . or >
playback is stopped
repeatedly to select the
track.
3 Press ENTER.
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
nN to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
13