Yaesu FTM-7250DE Advance Manual page 37

Menu Selection Details
4. Repeat the previous step as necessary to complete the message (up to 8 characters).
5. To correct a mistake, press the [ BAND ( SQL )] key to backspace the cursor; now re-en-
ter the correct letter/number.
6. When the desired opening message is completed, press the [ MHz ( SETUP )] key mo-
mentarily to confirm the message, then press and hold the [ MHz ( SETUP )] key to save
the settings and exit to normal operation.
29 PAG CD-R
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch function
See page 10 for details.
30 PAG CD-T
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch function.
See page 10 for details.
31 PRG P3
Function: Programming the function assigned to Microphone [ P3 ] key.
Available Values: SQL OFF / HOME / WX CH* / CD SRCH / SCAN / T CALL / TX
POWER / MODE / GM / WIRES-X / REV / DW or one of the all Set mode items (except
Set mode items #31 and #32).
Default: WIRES-X
*: USA version only
32 PRG P4
Function: Programming the function assigned to Microphone [ P4 ] key.
Available Values: SQL OFF / HOME / WX CH* / CD SRCH / SCAN / T CALL / TX
POWER / MODE / GM / WIRES-X / REV / DW or one of the all Set mode items (except
Set mode items #31 and #32).
Default: Depends on the transceiver version.
*: USA version only
33 RADIO ID
Function: Displays the transceiver IDs.
RADIO ID is a 5-digit code consisting of alphanumeric characters that is written into the
transceiver during factory production.
The RADIO ID cannot be edited.
34 RF SQL
Function: Adjusts the RF Squelch threshold level.
Available Values: S1 - S8 / OFF
Default: OFF
36