Yaesu FTM-7250DE Advance Manual page 27

GM Function
Displaying the information of the other station received by GM (Group Monitor) function
1. When receiving the signals with the same DG-ID number, press the [ MODE ( DG-ID )]
key to reveal the other station information:
• Depending on the model, the information such as the call sign of the other station,
latitude, longitude and so on may be displayed.
• When receiving the signals of multiple stations, press the [ MODE ( DG-ID )] key to
display the call sign of the other station, and then rotate the DIAL knob to select the
other stations to be displayed on the LCD.
• Up to 24 stations may be displayed in order of their reception.
Note: • The FTM-7250DR/DE may not send its own location information because the
FTM-7250DR/DE is not equipped with the GPS function.
• The position information is displayed only when the latitude and longitude
information is included in the signal of the other station.
• The transceivers that may transmit position information with the GM function are
as follows: (As of Mar. 2018).
FTM-400XD/FTM-400D series, FTM-100D series, FT2D, FT1XD, FT1D, FT-
991A/FT-991*
(*: Latitude and longitude setting must be entered manually, or an external GPS
device must be connected.).
GM information screen
(Automatically switching display)
Group Mode Display
Call Sign 1
Latitude
*2
Longitude*
2
Own DG-ID Number Display
Switch by the key
Call Sign 2
Select by the DIAL konb
Switch by the key
Switch by the key
Switch by the key
Memory Tag Display*
Select by the DIAL konb
*1: Memory tag display is displayed in the case of the
memory channel or the home channel setting the
memory tag.
*2: The Latitude and longitude are displayed only
when position information is included in the signal
of the other station.
26
Frequency Display
1
Call Sign 24