Timer Mode - Grundig SC220BL Quick Start Manual

TIMER MODE

Alarm mode
Setting the alarm time
1
Switch the device to standby with
»ON/OFF«.
2
Set the alarm time by turning the rotat-
O
ing swivel » «.
3
Press » « to activate the alarm func-
tion.
– Display: »
e
»BELL«.
4 Select the desired sound source (radio
station, USB/SD or buzzer) with »
«.
– Display: »BELL« = alarm signal,
»MUSIC« = radio station or USB/SD.
5
Select the station you want using the
switch »1 2 3 4
2 3
« (SC 230 USB).
– The device wakes you up at the set
time with the signal tone or a radio
station with last selected volume, in
addition, the Wake Up Light is acti-
vated. (alarm duration is 60 minutes).
Notes:
With the SC 230 the program source
7
USB/SD with the slide
3
« can also be selected as an
alarm signal.
_______________________________________
« and »MUSIC« or
« (SC 220) or
switch»1 2
If the program source USB/SD has
7
been selected but no USB data store
has been connected, the device
alarm uses a signal tone.
Interrupting the alarm
1
Press »SNOOZE« while the alarm is
sound.
– The alarm signal (radio station, USB/
SD or signal) stops and the Wake Up
Light disappear.
– The alarm signal goes on again at
six-minute intervals (overall alarm
duration is 59 minutes).
End the alarm
1
Press »ON/OFF« while the alarm is
sound.
– The alarm signal (radio station,
USB/SD or signal) stops and the
»1
Wake Up Light disappear.
– The alarm retains the set time for the
next day.
Activating and deactivating
the alarm
1
In standby mode, deactivate the alarm
by briefly pressing »
– Display: »
»BELL« disappears.
– The set alarm time is saved.
2 In standby mode, activate the alarm by
briefly pressing »
«.
« and »MUSIC« or
e
«.
ENGLISH
29