Setting The Time - Grundig SC220BL Quick Start Manual

SETTINGS

Setting the time

1 Switch the device to standby with
»ON/OFF«.
– Display: »0 : 00«
2 Press and hold »SET
setting.
– Display: the time is flashing, the co-
lon illuminate continuously.
3
Press »HOUR
4 Press »MIN « to set the minutes.
5 Press »»SET « to confirm the setting.
7
Searching for and saving
radio stations
You can store 3 radio stations on presets
(SC 230 USB) and 4 radio stations for
SC 220.
Automatic station search
1
Switch the device from standby with
»ON/OFF«.
2 Activate the station search by pressing
»HOUR « or
quency display changes to rapid run-
through forward or reverse.
– The search stops when a station is
found.
____________________________________________
« to activate the
7
« to set the hours.
»MIN « until the fre-
Manual station search
1
To move the frequency forward in
steps, briefly press
»MIN « several times.
– The frequency changes in steps of
50 kHz.
Storing stations to presets
1 Select the desired station position with
»1 2 3 4
switch
2 3
« (SC 230 USB).
2 Select the FM radio station with
»HOUR « or
3
Press »SET « to activate the memory
7
function.
– Display: »
4
Press »SET « to save the station.
7
– Display: »
Note:
If stations are already stored on the
7
presets, they are overwritten when
new stations are stored.
5 To store more stations, repeat steps
to 4 as described above.
»HOUR « or
« (SC 220) or
»MIN «.
« flashes.
« illuminate.
ENGLISH
»1
1
25