Panasonic AG-X2 Operating Instructions Manual page 84

Menu – [CAMERA] menu
[FACE DETECT/TRACKING MODE]
Switches the behavior of focus and exposure compensation settings for the face detection/tracking AE&AF function.
[FACE DETECT/TRACKING AF]
[FACE DETECT/TRACKING AE&AF]
(Factory setting: [FACE DETECT/TRACKING AE&AF])
[USER SW]
Sets the function to assign to the <USER1> to <USER9> buttons or the [USER10] to [USER14] button icons.
•
For details about setting the USER button (
•
Following functions can be assigned to [USER1] to [USER14].
– [INHIBIT], [AWB], [DRS], [FBC], [PUSH AUTO], [S.GAIN], [AREA], [AF AREA], [ATW], [ATW LOCK], [SPOTLIGHT],
[BACKLIGHT], [AE LEVEL], [Y GET], [FOCUS MACRO], [O.I.S.], [O.I.S. MODE], [i.ZOOM], [D.ZOOM], [IR REC], [FAST
ZOOM], [ADAPTIVE MATRIX], [REC SW], [PRE REC], [VFR], [SUPER SLOW], [BACKGR PAUSE], [REC CHECK], [DEL
LAST CLIP], [SLOT SEL], [AUDIO CH1 LEVEL], [AUDIO CH2 LEVEL], [FOCUS ASSIST], [WFM], [ZEBRA], [LEVEL
GAUGE], [LEVEL GAUGE SET], [LCD/VF OUTPUT]
[AUDIO OUT], [FACE DETECT], [MENU], [LOAD SETUP FILE], [LCD BACKLIGHT], [CARD READER MODE],
[STREAMING START]
* Available for setting when using
[USER1]
[USER2]
[USER3]
[USER4]
[USER5]
[USER6]
[USER7]
[USER8]
[USER9]
[USER10]
[USER11]
[USER12]
[USER13]
[USER14]
After detecting faces, faces are tracked while auto focusing.
After detecting faces, faces are tracked while auto focusing and automatically
adjusting exposure.
Assigning functions to the USER buttons:
.
Sets the function to assign to the <USER1> button.
(Factory setting: [AREA])
Sets the function to assign to the <USER2> button.
(Factory setting: [AE LEVEL])
Sets the function to assign to the <USER3> button.
(Factory setting: [SLOT SEL])
Sets the function to assign to the <USER4> button.
(Factory setting: [WFM])
Sets the function to assign to the <USER5> button.
(Factory setting: [ZEBRA])
Sets the function to assign to the <USER6> button.
(Factory setting: [O.I.S.])
Sets the function to assign to the <USER7> button.
(Factory setting: [D.ZOOM])
Sets the function to assign to the <USER8> button.
(Factory setting: [REC CHECK])
Sets the function to assign to the <USER9> button.
(Factory setting: [AWB])
Sets the function to assign to the [USER10] button icon.
(Factory setting: [FOCUS MACRO])
Sets the function to assign to the [USER11] button icon.
(Factory setting: [BACKLIGHT])
Sets the function to assign to the [USER12] button icon.
(Factory setting: [FACE DETECT])
Sets the function to assign to the [USER13] button icon.
(Factory setting: [ATW LOCK])
Sets the function to assign to the [USER14] button icon.
(Factory setting: [MENU])
* *
, [LCD/VF HDR] , [LCD/VF V-Log]
84
65)
*
, [VF ON/OFF], [LCD/VF DETAIL],