Panasonic AG-X2 Operating Instructions Manual page 116

Menu – [NETWORK] menu
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
•
If you do not use default gateway, set to [0.0.0.0].
•
Cannot be set when [WLAN IPv4 SETTING]
•
Disables the setting for the default gateway when [WLAN PROPERTY]
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
•
Disables the setting for the primary DNS server when [WLAN PROPERTY]
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [0.0.0.0])
•
Disables the setting for the secondary DNS server when [WLAN PROPERTY]
[LAN IPv4 SETTING]
[DHCP]
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the unit.
[OFF]
[CLIENT]
[SERVER]
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
•
Cannot be set when [LAN IPv4 SETTING]
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
•
Cannot be set when [LAN IPv4 SETTING]
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
•
Cannot be set when [LAN IPv4 SETTING]
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
[DHCP]
Does not use DHCP.
Performs automatic acquisition through DHCP. The address from 192.168.0.10 through 192.168.0.255 is
automatically assigned when the IP address cannot be acquired automatically within 1 minute.
Enables the DHCP server function of the unit.
[DHCP]
[DHCP]
[DHCP]
[CLIENT] is selected.
[TYPE]
[TYPE]
[TYPE]
[CLIENT] is selected.
[CLIENT] is selected.
[CLIENT] is selected.
116
[DIRECT] is selected.
[DIRECT] is selected.
[DIRECT] is selected.