Panasonic AG-X2 Operating Instructions Manual page 117

Menu – [NETWORK] menu
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [0.0.0.0])
[LAN IPv6 SETTING]
[ENABLE/DISABLE]
Sets whether to use IPv6.
[ENABLE]
[DISABLE]
(Factory setting: [DISABLE])
[DHCP]
Sets whether to use automatic acquisition via DHCP.
[OFF]
[CLIENT]
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [::])
[PREFIX LENGTH]
Sets the prefix length of the subnet.
(Factory setting: [64])
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [::])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [::])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [::])
[USB-LAN IPv4 SETTING]
[DHCP]
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the unit.
[OFF]
[CLIENT]
[SERVER]
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
•
Cannot be set when [USB-LAN IPv4 SETTING]
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
•
Cannot be set when [USB-LAN IPv4 SETTING]
Uses IPv6.
Does not use IPv6.
Does not use DHCP.
Performs automatic acquisition through DHCP.
Does not use DHCP.
Performs automatic acquisition through DHCP. The address from 192.168.0.10 through 192.168.0.255 is
automatically assigned when the IP address cannot be acquired automatically within 1 minute.
Enables the DHCP server function of the unit.
[DHCP]
[DHCP]
[CLIENT] is selected.
[CLIENT] is selected.
117