Management Of Setting Information - Panasonic AG-X2 Operating Instructions Manual

Network Connection – Streaming function

Management of setting information

You can set, save and load the RTMP(S) destination.
Setting of the destination
Information regarding the destination can be set or referenced.
Setting the destination with the camera menu
1
Select the [NETWORK] menu
2
Enter the destination URL in the [NETWORK] menu
RECEIVER URL].
•
Enter the destination URL in following format.
– rtmp://(server URL):(port number)/(path)/(stream key)
– rtmps://(server URL):(port number)/(path)/(stream key)
•
In general, a parameter for the stream key is required for URL, but the stream key may be contained as a part of the path
depending on the service. For details, refer to the manual for each streaming service.
Referencing destination from the memory card
1
Insert the memory card with the destination information saved.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu
2
Select the [NETWORK] menu
•
If the setting information in the memory card is not information for the selected protocol or the cloud, it will be treated as no
setting.
Saving the destination information on the memory card
1
Insert a memory card formatted with the unit.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu
2
Select the [NETWORK] menu
3
Select [YES].
•
Only items saved are the ones that are used in the destination setting.
•
The name of the file in the memory card to save the destination information cannot be changed.
•
The file with the destination information saved on the memory card is encrypted.
•
Save is not possible when the starting character string of the [RTMP(S) RECEIVER URL] ("rtmp://", etc.) is not set correctly.
Loading destination information from the memory card
1
Insert the memory card with the destination information saved.
•
The card slot to perform loading and saving can be set in the [OTHERS] menu
2
Select the [NETWORK] menu
3
Select [YES].
•
The name of the file to load destination information saved on the memory card cannot be selected.
•
The setting information that can be loaded (referenced) by the unit is as follows.
– Information saved with the unit
– Setting file created with the P2 Network Setting software (
[STREAMING] [CONNECTION INFO.]
[STREAMING] [CONNECTION INFO.]
[STREAMING] [SAVE (SD CARD)].
[STREAMING] [LOAD (SD CARD)].
Entering the setting using the setting tool:
285
[STREAMING] [RTMP(S)
[FILE] [SLOT FOR LOAD/SAVE].
[FILE] [SLOT FOR LOAD/SAVE].
[FILE] [SLOT FOR LOAD/SAVE].
286)
[MEMORY].
[SD CARD].