Panasonic AG-X2 Operating Instructions Manual page 81

Menu – [CAMERA] menu
[O.I.S. MODE]
Switches the operation mode of the optical image stabilizer function.
When [O.I.S. MODE] has been assigned to a USER button, [NORMAL]/[PAN/TILT]/[STABLE] switch in order with the USER
button.
[NORMAL]
[PAN/TILT]
[STABLE]
(Factory setting: [NORMAL])
[ATW]
You can set ATW (auto tracking white balance function) when the <WHITE BAL> button is pressed.
[Ach]
[Bch]
[PRE]
[OFF]
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
≥[FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[ATW TARGET R]
Make fine adjustments to the strength of red when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥[−10]...[+10]
(Factory setting: [0])
[ATW TARGET B]
Make fine adjustments to the strength of blue when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥[−10]...[+10]
(Factory setting: [0])
[W.BAL PRESET]
Sets the color temperature for when the <WHITE BAL> button is pressed to switch to "Preset".
The items that can be set are as follows.
≥[3200K], [5600K], [VAR]
(Factory setting: [3200K])
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
The setting can also be operated by the multidial.
This is enabled when [W.BAL PRESET] is set to [VAR] and you press the <WHITE BAL> button to switch to "Preset".
The items that can be set are as follows.
≥[2000K]...[15000K]
(Factory setting: [3200K])
[H.ZOOM SPEED]
Sets the zoom speed of the handle zoom.
The items that can be set are as follows.
≥[1]...[7]
(Factory setting: [4])
Specifies the standard setting for a good balance of correction for large and small camera shake.
Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.
Specifies a setting appropriate for fixing a composition to shoot a subject.
If you have pressed the <WHITE BAL> button to switch to "Ach", this is set to [ATW].
If you have pressed the <WHITE BAL> button to switch to "Bch", this is set to [ATW].
If you have pressed the <WHITE BAL> button to switch to "Preset", this is set to [ATW].
Even if you press the <WHITE BAL> button, [ATW] does not turn on.
81