The Backlight Does Not Turn On When I Adjust The Brightness; The Lcd Display Cannot Be Viewed Properly - Sony CLIE PEG-UX40 Frequently Asked Questions Manual

My CLIÉ handheld does not produce any sounds
B Adjust the volume settings in the Adjust Volume screen displayed by
tapping in the status bar.
Tip
If [Muting] is selected in the Adjust Volume screen, all sounds, including Audio, are muted.
b
For details, refer to "CLIÉ™ handheld components: Status Bar" in the supplied "Read
This First (Operating Instructions)".
The backlight does not turn on when I adjust the
brightness level
B If the brightness is set to the lowest level, the display may be illegible.
However, this is not a malfunction.

The LCD display cannot be viewed properly

B Depending upon the angle of vision, the brightness may be uneven, however,
this is not a malfunction. You can adjust the brightness level in the Adjust
Brightness dialog box displayed by tapping
Graffiti 2 writing area. If the backlight is off, you can turn it on by sliding
down the POWER/HOLD switch and hold it for more than two seconds.
Tip
You can switch the backlight on and off by pressing the L key while pressing the Ctrl key on
the hardware keyboard.
at the top right of the
Continued on next page
15