When Using Graffiti; My Clié Handheld Does Not Recognize Handwritten Characters; When Using Decuma Input - Sony CLIE PEG-UX40 Frequently Asked Questions Manual

My CLIÉ handheld does not recognize handwritten
characters (when using Graffiti
B To have your CLIÉ handheld recognize handwritten characters entered
with the stylus, you must use Graffiti
b
For details, refer to "Entering text on your CLIÉ™ handheld: Using Graffiti
2 to enter text" in the supplied "Handbook".
B Make sure you enter the Graffiti
B Make sure you enter the Graffiti
®
the Graffiti
B Check that Graffiti
b
For details, refer to "Entering text on your CLIÉ™ handheld: Using Graffiti
2 to enter text" in the supplied "Handbook".
B If the letter "L" is registered as a menu command for an application, the
letters "K", "T", "I", and "X" will not work as menu command.
B How to enter Graffiti
b
For details, refer to "Entering text on your CLIÉ™ handheld: Using Graffiti
2 to enter text" in the supplied "Handbook".
My CLIÉ handheld does not recognize handwritten
characters (when using Decuma Input)
B If your handwriting cannot be recognized correctly as numbers or special
characters in General characters mode, switch the Decuma Input area from
General characters mode to Numbers and special characters mode.
b
For details, refer to "Entering text on your CLIÉ™ handheld: Using Decuma
Input to enter text" in the supplied "Handbook".
B Refer to "Decuma Input" in the "CLIÉ Application Manual" installed on
your computer.
20
2 writing area and numbers in the upper side.
®
2 is not shifted into punctuation mode.
®
2 characters faster and more accurately.
®
2 )
®
2.
®
2 strokes in the Graffiti
®
2 strokes for letters in the lower side of
®
®
2 writing area.
®
®